How to reset password for Aruba Controller

How to reset password for Aruba Controller
To restore the admin password on the controller, follow these steps:
  1. Log in from the console.
  2. Use “password” as the user name and use “forgetme!” as the password.
  3. Enable the mode password as “enable”.
  4. In configuration mode, enter the ‘mgmt-user admin root’ command to reset the admin password.
  5. Re-login using the new admin password.
  6. In configuration mode, enter the ‘enable secret’ command to reset the enable mode password.

How to reset password for Aruba Controller

 For example: 
 User: password
Password: forgetme!
(aruba) >enable
Password: enable
(aruba) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(aruba) (config) #mgmt-user admin root
Password: password>
Re-Type password: password>
(aruba) (config) #exit
(aruba) #exit
(aruba) >exit
Below are the steps to reset the enable mode password from the controller CLI.
User: admin
Password: password>
(aruba) >enable
Password: enable
(aruba) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(aruba) (config) #enable secret
Password: password>
Re-Type password: password>
(aruba) (config) #write memory
sometimes you have the admin password of the controller but not have the enable mode password so what to do…….?
Access the Controller via GUI And change the enable mode password in Controller Wizard.
Navigate to Configuration > Controller Wizard > Under Wizards > Configure Controller >Basic Info> Enter any Name of your choice, Password for User Admin, retype the same, Password for Enable mode Access here is the place where we can reset the enable mode password and retype the same click on Next
Hope you will like my post.How to reset password for Aruba Controller. please share with others.

 

Comments

  1. By Website

  2. By Terese

  3. By Zelda

    • By ciscohite

  4. By Abigail